728x90
my iParenting
From Our Sponsors
e-newsletters
Sign up to receive our free weekly e-newsletters

new terms of use
new privacy policy
award-winning products
The iParenting Media Awards program helps parents find the best products for their families.

Home Safe Home

Safety Devices New Parents Sometimes Overlook

By Mary Dixon Lebeau

Pages:  1  2  3  4  5  

The second type of smoke detector, the photoelectric smoke detector, looks for the presence of visible byproducts of combustion in the detection chamber. When these combustibles fill the chamber to a sufficient density, an alarm sounds. These detectors respond more quickly to smoldering fires with heavier smoke.

Heat detectors are also available and are often incorporated in the smoke detector itself. According to the U.S. Consumer Product Safety Commission, each type of detector is efficient as long as it is properly installed and maintained. Since most dwellings will require more than one smoke detector, it is suggested that you buy a combination – a photoelectric smoke detector for the first floor, perhaps, and an ionization smoke detector for the second. It's also a good idea to combine electrical and battery-operated units to assure full protection.

How?
You should mount your smoke detectors high on a wall or a ceiling, using the following tools: a screwdriver, a drill-bit set and a cordless drill.

Wall units should be mounted so that the top of the detector is 4 to 12 inches from the ceiling. Ceiling-mounted units should be placed at least 4 inches from the nearest wall. Don't install a smoke detector too close to a window, door or air-forced register because drafts of air could interfere with the detector's operation.


Pages:  1  2  3  4  5  

Want to see more?

Comments

There are no comments for this article yet.Be the first to add a comment.

Post As:
Enter your comment below:
Title
Comment Text
CAPTCHA
Please note that any comments submitted become the property of Disney Family / iParenting and can be edited and posted at our discrection.